Certified PROFIBUS Installer Training
Certified PROFIBUS Installer Training
Certified PROFIBUS Installer Training
What good is competent network design, if the installation of the PROFIBUS® network is not properly carried out?
The installation technicians need to know what they are doing.
This two-day course covers theory and practice for the physical layer of a PROFIBUS® DP/PA installation and suitable procedures and tools to check whether the network is working as well as it should.
The course ends with a test for certification from PROFIBUS® International (PI).
In many projects today the Certified PROFIBUS® Installer qualification is required before the technician is allowed to work on the network site.
Goals:
Need to be able to install, commission and troubleshoot the physical layer of PROFIBUS® DP and PA networks.
This course can help you avoid mistakes and save money in the installation phase of your project.
Theory
- Overview of PROFIBUS® technology and transmission technologies
- Electrical characteristics of cable, signal quality
- RS485 PROFIBUS® DP details
- Cable specifications
- Topology, segment lengths
- Segment spurs
- Connectors
- Active termination
- Repeaters and components
- MBP PROFIBUS® PA details
- What is the difference between PROFIBUS® DP and PA?
- Power supply, coupler, link
- Cable specifications
- Topology, segment lengths
- Connections
- Termination
Practice:
- Wiring of a bus segment
- PROFIBUS® DP and PA
- How is a signal measured?
- What is a good, or bad, signal?
- External influences on the bus cable
- Cable placement
- Grounding / shielding concept
- Simulation of disturbance
- Measurement with oscilloscope
- Use of the latest tools
- Creating audit protocols
Target Audience:
This course is intended for everyone who has to install PROFIBUS networks
of PROFIBUS PA as well parts on DP.
For example:
Planners, Technicians, Installation Contractors,
Maintenance Technicians and Electricians involved in
installation and testing of PROFIBUS® DP and PA networks.
Pre-Requisites:
There are no prerequisites for joining the course, It is, however, recommended that the attendee has basic knowledge of following:
- Terms which are common in the industrial automation (PLC, remote I/O, etc)
- Terms which are common in the electrical engineering (resistance, voltage, etc)
- Capable of working with Windows-based applications
Training Methodology:
Theory + Practice
Duration:
2 days training including exam
Training Date:
18 - 19 August 2016
Language
The training will be conducted in English. The documents are in English as well.
Place of training
Endress+Hauser (S.E.A.) Pte Ltd | 3A International Business Park, # 07 - 08 ICON@IBP, Tower A | 609935 Singapore | Singapore
Course Fee including PI Certification registration:
Please contact the person below for registration:
Salbiah Siraj
Endress+Hauser (S.E.A.) Pte Ltd | 3A International Business Park, # 07 - 08 ICON@IBP, Tower A | 609935 Singapore | Singapore
Phone: +65 67685 736 | Mobile: | Fax: +65 65666 848
salbiah.siraj(at)sg.endress(dot)com
The attendees receive:
Training material, writing materials.
Lunch and break refreshments are included
Your trainer contact person from Endress+Hauser:
Michael Ulrich
Endress+Hauser Process Solutions AG | Christoph Merian-Ring 12 | CH-4153 Reinach | Switzerland
Phone: +41 61 715 7361 | Mobile: +41 76 553 8771 | Fax: +41 61 715 2800
michael.ulrich@solutions.endress.com |